PRO CB BETON SOFT LASER
Discover Norton Core Bits
especially designed for drilling.
Reinforced concrete, cured concrete,
kerb stones, concrete, pipes,
engineering bricks, facing bricks,
refractory bricks, flagstones and
paving stones, block paving, washed
gravel concrete slabs, natural stone
, flint, sandstone, limestone.
Useful length: 450mm
Connection: 1-1/4" UNC female thread
Applications: Concrete,
Reinforced concrete and hard building materials
10mm brazed segmenteds
for wet and dry drilling.
Special soft bound for use
in harder materials or for
high speed drillings.
We are able to manufacture
to your specification diamond
core drill bits from 10 -
1000mm Diameter ½″ BSP
and 1 ¼” UNC thread, in a
variety of lengths with segments
available for reinforced concrete,
asphalt and brickwork; we also
offer a brilliant re-tipping service.
Core drill bits are specifically
designed for cutting precise
circular holes in most construction
materials like brick, stone,
concrete and masonry.
Made from steel, the diamond
core drill bit comes in many
lengths and has various sized
teeth depending on the material
and cutting requirement.
A core bit (Fig. 1, Fig. 2)
is a drilling tool with a
hole through the center
that removes sediment rock
and allows the core pedestal
to pass through the bit and
into the core barrel.
A 220 V core drill of 2000 W
will do well for coring less than
500 mm, however, it is better to
turn to a core drill at 380 V of
at least 4000 W for deep core
drilling.
You can use a drilling
bit to make a hole or
you can use a core bit
to remove a core of
glass and leave a hole.
The difference is that
a drill bit will create the
hole size that it advertises,
but the core bit will create a
circle of glass in the size that it advertizes.